Cardiff Goat Enduro Splitboard 2025

HALFcamber60
–
The Cardiff HALFcamber places camber where it is absolutely necessary and gradual rocker everywhere else. The result is maximum glide, maneuverability and edge control. HALFcamber60 means 60% of the running surface is cambered.

PROflex (1 Soft – 10 Stiff)
–
150cm: 5 // 154cm: 6 // 158cm: 7 // 162cm: 8 // 166cm: 9

RADIcALSIDECUT™
–
Blend of Radial and Progressive sidecuts are used on all CARDIFF boards to give each board a unique character.

PERFECTpivot™ 3.0
–
Perfect Pivot matches sidecut to rocker profile for each board to allow maximum performance

CARBONcore
–
Cardiff Enduro cores feature a poplar-paulownia construction with vertical layers of carbon fiber in-between. This simple detail helps the core retain its shape for years.

FULLplank™
–
Cardiff splitboard cores run tip to tail with special reinforce-ments in the binding and touring hardware locations.

TRIAXglass
–
Two layers of triaxial fiberglass above and below the core

UNIwall
–
Seamless urethane sidewalls fuse to cores to create the most durable and damp ride available – featured on Enduro Series decks.

BOARDERpatrol Technology
–
BOARDERpatrol technology uses poplar stringers which fuse with the UNIwall seamless urethane sidewall to reinforce the edge and provide an incredibly damp ride.

RACEbase™ G
–
Black graphite infused sintered base for maximized glide and easy repair.

SHRredges™ 2.0
–
Sharpened and beveled 2.0mm Hardened Rockwell 48c steel edges for maximum durability and precise control

ENDUROcap
–
On both Enduro and Pro Carbon splitboards, Cardiff use a scratch resistant dimpled topsheet for maximum performance and protection

Art by Kyson Dana

BIloba™ SP
–
All CARDIFF splitboards feature a chamfered inner edge of the split ski at both the tip and tail to allow for hood free touring and damage free connection

SPLITtech Optimized
–
All CARDIFF splitboards are optimized for both soft-boot and hard-boot touring setups. Hard-boots typically have longer sole lengths than soft-boots and hard-boot bindings such as Phantom Alphas sit lower to the surface of the splitboard. This requires a slightly wider deck underfoot, which all of our splitboards feature. Our splitboard cores are reinforced in the connection areas and bindings to handle additional forces from the metal and other hard bindings.

Weight
–
150 = 2920 grams, 154 = 3050 grams, 158 = 3270 grams, 162 = 3440 grams, 166 = 3640 grams